Capacity = 600 Kg (Even with concentrated points loading mode - Contact pressure limit = 2 kg/cm2) This apparently simple forklifted trolley has the function of supporting precious molds for car bodies. It can withstand temperatures up to 200 °C and pressurized environments. What kind of molds? Carbon fiber fairings for PAGANI AUTOMOBILI ! The trolley has a surface completely covered with slots on which to quickly connect telescopic jacks for the different molds to be supported. It is also equipped with a double pedal brake and handle to allow the operator to work correctly during the preparation phases. Different formats have been designed according to use and positioning limits.

This particular trolley has the function of housing pre-assembled wheel kits. It can be towed, even in series. Total load: 150 kg A peculiarity of the design was to reduce the dimensions as much as possible due to space requirements. This involved a careful analysis of the dynamic conditions, in particular the load centers and the possibility of overturning during towing, routes and curves. For this purpose, the minimum curve radii were calculated based on the towing speeds, also considering the maximum slope of the pavement and all limits to avoid overturning, making all verifications. Here, you can download complete calculations: Another condition was that the wheels had to be positioned in an orderly manner avoiding scratches on the parts of assemblies. For this purpose, a special container has been designed with an integral soft plasticization treatment.

Capacity load: 350 kg This wheeled platform can be towed and has the function of supporting and transporting a specific frame during assembly and coupling phases with other frames. Lifting is done with a screw on a pantograph system operated by an electric screwdriver. The trolleys can be linked together to be towed simultaneously. For this purpose, the minimum curve radii were calculated based on the towing speeds, also considering the maximum slope of the pavement and all limits to avoid overturning, making all verifications. Here is available calculations report:

Unexpected and much desired ... I always hope to be helpful in my work. I certainly do my best !

This is a special machine specially designed for a prestigious customer who needs to manipulate molds for automotive sporting fairings. The machine consists of two trolleys with a synchronous lifting system controlled by inverters, transducers and PLC. The system is controlled with a manual controller via cable. The control during the excursion takes place both during the ascent and during the descent. It is also possible the rotation of loads, manually using handwheel or by integrating a motorization dedicated to rotation into the system. Various tools are available for connecting additionals molds. The fast coupling takes place in a simple way by means of a torsion spindle shaft and a driven shaft. The system is quite practical since the rotation axis is on oscillating supports. Important note: During the descent the load is released from the vertical excursion system in order to avoid breakage of the load when it rests on the support. ----- Technical data

This is special equipment designed for lifting and handling of different heavy crane components. The peculiarity is that it adapts to different connection points and is adjustable in length and width, with very fast and practical mechanical systems. Lifting by forklift is also provided with dedicated points. Particularly suitable for a barycentric lifting designed for assembly operations. It is possible to lift the heavy components maintaining their desired inclination, within the allowed limits.

This is special equipment designed for lifting and handling of different heavy crane components. The peculiarity is that it adapts to different connection points and is adjustable in length and width, with very fast and practical mechanical systems. Lifting by forklift is also provided with dedicated points. The equipment can be used in three different configurations: With double rigid arm With double flexible chain Both systems Particularly suitable for a barycentric lifting designed for assembly operations. It is possible to lift the heavy components maintaining their desired inclination, within the allowed limits.

This special tool has been designed to ensure the correct positioning of the rocker arm rods on a 4-cylinder engine during in-line assembly operations. The operator positions the mask, places the rods and locks them to the tool, then checks that they have been correctly seated and therefore rest in the right way on the cams.

A simple four-place container, for housing and transport of various sizes of conveyors. Forkable on four sides and stackable. The products are placed on special plates coated anti-abrasion with rubber, in order to preserve the integrity of the treated surface b of the products to be housed. Total load: 250 kg

This rack has been designed to accommodate various sizes of heavy connecting rods. It is composed of an optimized frame and various replaceable and screwable blocks coated with a special rubber treatment. The rack can be fork-over on four sides and can be stacked empty or fully loaded. Total load: 500 kg A dedicated trolley has also been designed for manual handling, as an aid to assembly operations in the operator's workplace.

This is a trolley for internal handling of frames of various formats. It has the particularity of being equipped with a centralized braking system that can be activated with a single pedal on the four wheels. It is also equipped with a lever with gas compression spring for grounding of the electric transmission during the welding phases.

This equipment has the function of safely compressing a gas spring during the assembly phase in line. The effort reduction is equal to 1/8, and it is equipped with stroke adjustments in both directions. The assembly operators have personally told me that they are satisfied with the tool and that they can finally perform the operations correctly. In addition to informing me that they have more to make ...